LifeStraw Escape High-Flow Pressurized Purifier | Product Guide
Resources
Long Term Storage Instructions
Related FAQ's & Troubleshooting
HELPFUL VIDEOS
Set Up and First Use
0:00 Introduction
0:30 Preparing for First Use
0:47 Rinse Off
1:09 Drain Water
1:30 Remove Filter Assembly
1:50 Install Carbon Filter
2:00 Reinstall Filter Assembly
2:20 Fill Tank
3:07 Pressurizing
3:31 Tips + Tricks
Backwashing and Maintenance
0:00 Introduction
0:58 First Steps
1:15 Begin Backwashing
1:40 Drain Water
1:49 Tips + Tricks
Short and Long-Term Storage
0:00 Introduction
0:30 Short-Term Storage
0:53 Long-Term Storage
2:33 Tips + Tricks
Resuming Use
0:00 Introduction
0:15 Drain Water
0:26 Remove Filter Assembly
0:36 Rinse Components
0:56 Install New Carbon Filter
1:07 Reassemble Filter Components
1:15 Reinstall Filter Assembly
1:28 Fill Tank
1:35 Pressurize
1:50 Tips + Tricks
Filter Replacement
0:00 Introduction
1:00 Replacing the Ultrafilter Membrane
2:35 Replacing the Activated Carbon Filter
Related FAQ's + Troubleshooting
What are the Escape materials made from?
What is the flow rate of the Escape?
How much does the Escape weigh?
Where do I get replacement filters for the Escape?
Are there any safety precautions for the Escape because it is a pressurized device?
How often should the filters for the Escape be replaced?
How much manual force does the Escape require to hand pump?