How to Replace Your LifeStraw Home Filters in Pitchers and DispensersUpdated 2 months ago

To keep your LifeStraw Home pitcher or dispenser performing at its best, it's important to replace the filters regularly. Here's a quick overview, along with a helpful how-to video:

Filter Lifespan & Replacement Guidelines:

• Activated Carbon + Ion Exchange Filter
  – Lasts up to 40 gallons / 150 liters (about every 2 months)
  – Replace when you notice a change in taste
• Membrane Microfilter
  – Lasts up to 264 gallons / 1,000 liters (about once per year)
  – Replace when water flow slows or stops

How to Replace the Activated Carbon + Ion Exchange Filter:

1. Remove the filter housing and pop off the bottom cap using your thumbs.
2. Remove and discard the used carbon filter.
3. Unwrap the new carbon filter and rinse it under water for 1 minute.
4. Insert the new carbon filter into the housing and snap the cap back on.

How to Replace the Membrane Microfilter:

1. Remove the filter housing from your pitcher or dispenser (Best practice: Replace the carbon filter at the same time.)
2. Discard the used carbon filter.
3. Remove the top lid of the housing to access the membrane filter.
4. Push the membrane filter out from inside the housing and discard it.
5. Insert the new membrane filter, pressing firmly until fully seated.
6. Install the carbon filter and reattach the bottom cap.

Final Step:

Run one full batch of water through the new filters. The flow may be slow at first (especially the first 3 batches), but it will speed up over time.

You're now ready to enjoy clean, great-tasting water again!

If you have any questions, we’re here to help.

Best regards,