How to store and clean the LifeStraw Mission or Family Filter

If you have the Mission and the Family products for long-term storage, we recommend thoroughly cleaning the filter, hose, and bag/bucket.

These steps are essential because they will prevent mold from forming.

  • Dissolve 2 tsp of chlorine solution (ordinary household bleach) into a container filled with about 2 liters of clean water.
  • Fill the bag/bucket with the prepared mix and start filtration.
  • Once purified water flows from the blue tap, close it and let it rest overnight.
  • After resting overnight, squeeze the red bulb three times (wait between each squeeze to allow the water to refill the red bulb).
  • Open the red tap to withdraw the water remaining in the bag/bucket.
  • After this procedure, ensure to rinse the filter thoroughly to remove all chlorine residue.
  • Dry all components and store them.
  • After a long storage time, fill the bag/bucket with water and open the red tap for 5 seconds (this will remove air trapped in the hollow fiber membranes).
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.